Custom Titanium Machining Particle For Industrial
Custom Titanium Machining Particle For Industrial
Chat Now
Product Details

Titanium  hydraulic cylinder are all customized as customers' drawing and they could be processed as any different design. 

Basic info

  Titanium hydraulic cylinder (also called a linear hydraulic motor) is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in construction equipment (engineering vehicles), manufacturing machinery, and civil engineering.

  Titanium hydraulic cylinders get their power from pressurized hydraulic fluid, which is typically oil. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end / head end).

The cylinder barrel is mostly made from a seamless tube. The cylinder barrel is ground and/or honed internally with a typical surface finish of 4 to 16 microinch.

Cylinder base or cap

The main function of the cap is to enclose the pressure chamber at one end. The cap is connected to the body by means of welding, threading, bolts, or tie rod. Caps also perform as cylinder mounting components [cap flange, cap trunnion, cap clevis]

Photos for titanium  hydraulic cylinder

titanium  hydraulic cylinder (2).jpg

titanium  hydraulic cylinder (5).jpg

titanium  hydraulic cylinder (13).jpg

titanium  hydraulic cylinder (1).jpg

  Above are some of the photos for CXMET's titanium hydraulic cylinder. Lot of them will make some of surface treat and then used as the special condition. 

  Welcome your kindly inquiry and order.