Titanium And Titanium Alloy Blind Flange
Flange type of Titanium And Titanium Alloy Blind Flange
Flange type: PL, So, WN, IF, SW, Th, PJ/SE, PJ/PR, BL, BL(S)
Face of flange: FF, RF, M, T, FM, G
Pressure of flange: 0.25MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa, 6.3MPa, 10.0MPa, 16.0MPa, 25.0Mpa
Titanium blind flange
This flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.
Face Finish for Flange
The finish on the face of a flange is measured as an Arithmetical Average Roughness Height (AARH). The finish is determined by the standard used. For example, ANSI B16.5 specifies face finishes within a range 125AARH -500AARH (3.2 Ra to 12.5 Ra). Other finishes are available on request, for example 1.6 Ra max, 1.6/3.2 Ra, 3.2/6.3 Ra or 6.3/12.5 Ra. The range 3.2/6.3 Ra is most common.
Flange Facings - BS 4504
The photos for titanium blind flange
CXMET have our own equipment for all the Titanium And Titanium Alloy Blind Flanges. Welcome your inquiries and orders.