Plate welding Titanium Flanges
Plate welding (PL) titanium flange PN2.5 PN6 PN10 PN16 DN10---DN780
Plate welding Titanium Flanges is a kind of part which is made of nonferrous metal titanium or titanium alloy and connected to the pipe end.
Titanium flange has holes, bolts to make the two flanges tight. Gasket between flanges. Flange pipe fitting, flanged pipe fittings) refers to the pipe with flange (flange or flange).
It can be cast (the figure is missing), or it can be threaded or welded. The flange joint is composed of a pair of flanges, a gasket and some bolts and nuts. The gasket is placed between the sealing surface of the two flanges. After tightening the nut, the specific pressure on the surface of the gasket will be deformed when it reaches a certain value, and fill the uneven place on the sealing surface to make the connection tight without leakage.
Titanium flange standard
Titanium flange type: TA0 TA1, TA2, TA3, TA4, TA5, TA6, TA7, TA9, TA10, TC1 and TC2, TC3, TC4, TC6, TC11, Grade1 Grade2 Grade5 Grade7 Grade9 Grade12, Ti6AL4V ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533.
Supply status of Plate welding Titanium Flanges: R or M
Titanium flange specifications: Spot 0.03mm to 0.8mm width from 80 to 500mm titanium rod (light rod) 2mm-250mm*3000mm titanium tube diameter from 3 to 120mm wall thickness from 0.5 to 20mm.4-110mm*0.8-10mm*6000mm titanium wire 0.1-8.0mm titanium cake 50mm-500mm*50mm-1000mm Titanium ring diameter 100 to 2020mm wall thickness from 10 to 300mm
Execution standard: GB/T2965, GB/T228, GB/T2039, GB/T3620.1, GB/T3620.2, GB/T4338, GB/T4698, GB/T5168,
GB/T5193, GB/T8180, GB/T13810-2007, GB/T2965-2007, ASTM B348, ASTM B381, ASTM F67, ISO5832-2 ASTM F136, ISO5832-3, AMS4928, MIL4911, ASTMF1713-08, ASTMF1295, ISO5832-11
Annealed state (M) hot working state (R) cold working state (Y) (annealed, supergenerated wave flaw detection)
The surface of the Plate welding Titanium Flanges
Forging surface, rolling surface, car surface, polished surface